Compact 1/2 Thread Electric Solenoid Valve for Water Inlet Flow Control, DC 12V Normally Closed, 0.02-0.8MPa

Specifications:

Rated power: 5W, with no need to divide the positive and negative poles. Working mode: quota system (an intermittent cycle work system, where the longest continuous work is about 4 hours, and it can continue to work after stopping for ten minutes, but there will be a danger of burning coils for more than four hours). Use fluid: (0-100°C) water. Flow characteristics of water: 0.02Mpa>1.5L/min; 0.10Mpa>7L/min; 0.30Mpa>12L/min; 0.80Mpa>20L/min. Insulation performance: The insulation resistance between the conductor and the non-conductor is greater than 100MΩ. Insulation class: Class E insulation. Service life: ≥500,000 times (laboratory data), ≥300,000 times (actual normal use). Valve type: diaphragm (operated by Servo). Usage: water and low viscosity fluids. Material: metal + plastic. External thread diameter: approx. 20mm. Screw hole pitch: 25mm. Size: approx. 84 x 57mm (L x H). Coil size: approx. 34 x 23mm (W x H). Unit conversion: 1mm=0.039inch.

Note: Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers' opinions to improve the selling, also if anything you're unsatisfied with, please contact us for a probable best solution.

Package Includes: 2Pcs

The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used. The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance. The insulation grade is high, and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time.

This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut). This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs.

product information: